JavaScript is not enabled!

RigExpert WTI-1  –  Specifications

General features
  • Transceiver audio interface for operating digital modes, voice recording and playback
  • CAT (Computer Aided Transceiver) system
  • FSK output
  • PTT and CW outputs
  • RS-485 port to connect external devices, such as antenna relays
  • WinKey emulation – work in progress
Initial configuration: direct connection to a PC
  • USB (Universal Serial Bus) connector
  • USB 1/2/3 compliant
  • Powered from the USB port
  • No USB drivers required
  • Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit) operating system
Normal operation: local area network connection
  • 2.4 GHz Wi-Fi network, 802.11 b/g/n
  • Infrastructure mode; a wireless access point or a wireless router is required
  • Open of encrypted networks are supported
  • External power supply (9…15 V DC, max. 0.5 A) is required
  • Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit) operating system on the operator’s computer
  • The virtual serial port, the virtual sound card and the controlling software is provided free of charge
Remote operation via Internet
  • ADSL or other high-speed Internet connection is required for remote operation
  • Static or dynamic IPV4 Internet addresses are supported at the transceiver side
  • The router should be set up to forward several UDP and TCP ports to the WTI-1
  • Any reasonably fast Internet connection at the operator side
Transceiver connection
  • Single 25-pin connector for transceiver cable
  • Various transceiver models supported
Audio interface
  • Insulated from digital nets
  • Maximum input/output amplitude is 1V
  • Input/output samplerate: 8 to 48 kHz
  • True 16-bit DAC/ADC used
CAT serial port
  • Baudrate: 300-115200 baud
  • Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs
  • PTT output: open collector and TTL-level
  • CW output: open collector
  • Maximum current is 500 mA
FSK output
  • Baudrate: 45-1200 baud
  • Open collector output
RS-485 port
  • Baudrate: 300-115200 baud
  • 3.5 mm, 3-pin audio connector

Dimensions: 12 x 8 x 3 cm

Weight: 0.3 kg

The RigExpert WTI-1 is made in Ukraine.