MixW 4

Buy / Upgrade
Info
Manuals
Downloads

Info

Important features of MixW 4:
  • Three in one (Logger, Digital, Contests)
  • KiwiSDR support
  • Digital mods including FT8 and FT4 with proprietary digital signal processing algorithms
  • Unique CW software algorithm with fine-tuning for solid (FB) signal.
  • User manual in English, Dutch and German languages
  • Convenient interface with the ability to multi-window, customize fonts, and display
  • A wide range of macros allowing for faster communication
  • Contest mode with support for modules with extended statistics – you can write contest modules yourself
  • User-Defined Contest – take part in any contest
  • Simple scripting programming language to write additional modules and statistics by yourself
  • Technical support by e-mail (response time no more than 24 hours considering WorldWide service)
System Requirements
Windows 7 or later with the following minimum configuration
  • 2 GHz processor 32-bit (x86) or 64-bit (x64)
  • 2 GB of RAM
  • 8 GB available hard disk space
  • Screen resolutions 1920×1200

Downloads

Downloads
MixW4 has a 15-day evaluation period, so you may try it before you buy it. The unregistered version is fully functional, it only shows the UNREGISTERED window to the user.

Important features of MixW 4:

  • Three in one (Logger, Digital, Contests)
  • KiwiSDR support
  • Digital mods including FT8 and FT4 with proprietary digital signal processing algorithms
  • Unique CW software algorithm with fine-tuning for solid (FB) signal.
  • User manual in English, Dutch and German languages
  • Convenient interface with the ability to multi-window, customize fonts, and display
  • A wide range of macros allowing for faster communication
  • Contest mode with support for modules with extended statistics – you can write contest modules yourself
  • User-Defined Contest – take part in any contest
  • Simple scripting programming language to write additional modules and statistics by yourself
  • Technical support by e-mail (response time no more than 24 hours considering WorldWide service)

Version 1.4.2

What's new in this version?

  • Fix LoTW, e-QSL

Version 1.4.1

What's new in this version?

  • Implement autoupdate for contests, plugins, and data files
  • Implement Statistic form
  • Implement macros for SSB mods ()
  • Implement macros
  • Implement HighDPI Scaling
  • Fix macroses
  • Fix CAT
  • Fix FT mods
  • Fix and new contests
  • Fix and update RTTY mode
  • Fix and mods CW decoder
  • Fix Waterfall
  • Fix layouts for windows
  • Fix WinKey
  • Fix bookmarks
  • Fix some crashes
  • Many fixes for minor bugs and users requests

Version 1.4.0

What's new in this version?

  • Fix crash when editing QSO
  • Fix bookmarks (colors, placement, and markers are not shifted when changing LSB / USB)
  • Fix Waterfall (when changing the CAT frequency, you need to reset history. Otherwise, it is possible to decode what was here a few seconds ago)
  • Extend Smart Macros (Ctrl + Space = IntQRZ2 = >)
  • Fix CAT
  • Export to Excel
  • Fix loading mod and connecting sound devices to them
  • Fix Check Call Partial
  • Fix size, resize windows
  • Fix Claster
  • Fix FT8 / 4
  • Fix Claster
  • Fix GRAB CALL macro
  • Support for VFO-A, VFO-B
  • Implement rotor support
  • Implement traditional (WSJT-X) user interface in FT8 mode
  • Implement the function of automatic transmission frequency shift depending on the current audio frequency
  • Rebuild the assembly on x64 (assessment of build capabilities, preliminary)
  • -Fix in digi modes
  • Fix in voice mods
  • Fix CW decoder
  • Fix short log
  • Fix macroses
  • Fix WinKey
  • Add recovery (fix) country in the log
  • Change MixW mode from cluster
  • Change cat mode when change mode MixW
  • New Info bar Legend layout
  • Hairlines on mods
  • Fix some crashes
  • Fix Band plan
  • Fix AutoCQ

Version 1.3.0

What's new in this version?

  • Updated and fixed many modules
  • Fixed crashes
  • Updated DigiFest QML
  • New contests QML v.3
  • Updated interface elements
  • New cty.dat

Version 1.2.0

What's new in this version?

  • FT-4
  • Fixed many different bugs
  • New cty.dat
  • New contests QML v.2
  • Added many different functions and features

Version 1.1.1

What's new in this version?

  • Fixed many different crashes
  • New cty.dat
  • BUG fixed: Cat Yaesu FT-991
  • New macro functionality
  • BUG fixed: “Allow manual tuning” in modes CONTESTI & OLIVIA

Version 1.1.0

What's new in this version?

  • BUG fixed: MixW 4 used PSK and BPSK modes. Using now only PSK
  • BUG fixed and added new features to the World map
  • BUG fixed: DX Cluster Settings (Modes, Webcluster)
  • BUG fixed: Color settings for RxView
  • Added test connection button to Callbook settings
  • BUG fixed and adding new features to the Waterfall
  • BUG fixed: Mouse click on RX & lock scroll text functionality
  • New contests QML v.2
  • Fixed many different crashes
  • ADIF v. 3.1.0
  • New cty.dat
  • Added many different functions and features

Version 1.0.8

What's new in this version?

  • BUG fixed: Not decoding in HELL mode
  • BUG fixed: Import-export ADIF
  • BUG fixed: Crash in CW mode
  • BUG fixed: RxView – scroll
  • BUG fixed: Macros import/loading from settings
  • BUG fixed: Transmit Macros
  • BUG fixed: Macros loading from contest settings
  • BUG fixed: Clear QSO in contest mode
  • BUG fixed: Select soundcards
  • BUG fixed: Filtering short log by Callsign
  • Added the ability to change the country in QSO
  • Added CAT FlexRadio
  • ADIF v. 3.0.9
  • Add export to Club Log
  • BUG fixed and adding new features to the Log

Version 1.0.7.2

What's new in this version?

  • BUG fixed: Not decoding in all modes with open KiwiSDR
  • Added: maximum text blocks in RXView. Prevent hanging MixW when much received text
  • Improving: Magnifier functionality
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.7.1

What's new in this version?

  • BUG fixed: Not decoding in all modes
  • BUG fixed: Crash after changing sound cards
  • BUG fixed: Crash if select sound cards Flex 6xxx series
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.7

What's new in this version?

  • BUG fixed: The Earth view does not show the direction on the callsign in the contest mode
  • BUG fixed: The grabber should not capture the callsign in a non-empty field
  • BUG fixed: Fields: Name, QTH not clear if a new callsign is absent in QRZ base
  • BUG fixed: AUTOCQ macro does not work as expected
  • BUG fixed: Cancelling an ADIF file output creates a .adi file
  • BUG fixed: Macro does not work
  • BUG fixed: Mode RTTYM displays frequency in the RX Window
  • BUG fixed: Import log from MixW-3 puts data in the wrong MixW4 log fields
  • BUG fixed: ADIF file load changes CNTY field data
  • BUG fixed: Update log entry with LoTW data. Dates incorrect
  • BUG fixed: MixW4 log search on country unreliable
  • BUG fixed: Unable to change QSO country
  • BUG fixed: Multiple RX windows change mode at the same time
  • BUG fixed: MixW4 crash whilst resizing 2nd Rx window
  • The color scheme of the Rx view is aligned with MixW3
  • Added choice of callsign for the grabber’s contour menu
  • CAT Kenwood commands processing improved
  • Always ON/OFF added to PTT RST/DTR CAT settings
  • Support RBN cluster
  • Band map added
  • Create bookmarks from DXCluster on the waterfall
  • New DX-Cluster
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.6

What's new in this version?

  • BUG fixed: search QRZ.com
  • BUG fixed: CAT Elecraft support
  • BUG fixed: RX view doesn’t save font settings
  • BUG fixed: Cabrillo settings dialog should get info from contest settings
  • BUG fixed: Contest start / end time should be UTC
  • BUG fixed: Earth view should show azimuth to callsign in contest mode
  • Now TuneDialog saves/restores its settings
  • BPSK mode: baud rate added to control bar
  • CW mode: acceleration / deceleration wpm added to control bar
  • Partial Check call added
  • Contest input bar added
  • MFSK mode added
  • Added / corrected some macros
  • Added use of QRZCQ service
  • Added use of QRZ.ru service
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.5

What's new in this version?

  • BUG fixed: 20m and 6m band plans fixed
  • BUG fixed: BPSK baud rate switching
  • BUG fixed: crash on Cancel in BPSK31 Settings window
  • BUG fixed: font settings not applied to Rx/Tx view
  • BUG fixed: double key should clear TX window
  • BUG fixed: DXCluster takes a lot of CPU time
  • BUG fixed: DXCluster should stop processing in hidden mode
  • BUG fixed: import ADIF doesn’t support latitude/longitude format ( XDDD MM.MMM )
  • BUG fixed: EDIT QSO: ITU and WAZ should be editable
  • BUG fixed: In the TX window and command do not work
  • BUG fixed: Mix stops decoding after CW TX
  • Olivia mode added
  • Contest mode added
  • RTTYM mode added
  • RX/TX controls moved to the status bar
  • eQSL send is now available via macro
  • Reset text settings allowed
  • Signs like PA0SU/J, TA1DX/50, VP8LP/100, CT9/DL8DBW/H… are now processed
  • Added import of the APP_DXKeeper_REGION tag to the standard ADIF’s tag REGION
  • TEN-TEC – and SRC–CATs are not supported
  • “Submode” column added to logger
  • ADIF location format can be selected on the settings page
  • Improved appearance of the macro redesign dialog
  • Added Copy/Paste/Clear/Cut support to the macro redesign dialog
  • Save/Load/Reset layout is now available
  • Show/Hide logger’s columns are now available
  • QRZ.ru is now supported
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.4

What's new in this version?

  • BUG fixed: toolbar buttons toggle views instead of creating multiple instances
  • BUG fixed: CAT settings restore all in case of Cancel
  • BUG fixed(CAT): CATCMD for Yeasu, CATCMD, and CATCMDHEX for Icom added
  • QSO statistics: shows informative tooltip for Settings and Logger buttons
  • Update cty.dat support implemented: place the new file in the “MixW4/Data folder”, go to the “Config Dialog/Settings” and press “Update cty.dat”
  • DX Cluster: view improvement: always show current band spots, more friendly appearance, and tooltips
  • FT8: marker placement on the waterfall fixed, decoding improved, view appearance became more friendly
  • restore layout is now available from “Config Dialog/Settings”
  • Known bug:
  • If you have problems with decoding, you need to close the RX window and re-open it.
  • We are working on it...

Version 1.0.3

What's new in this version?

  • mode Hellschreiber added
  • mode FT-8 improved
  • mode JT-65 redesigned
  • support for TI-5000 added
  • backup/restore bands plan implemented

Version 1.0.2

What's new in this version?

  • CW mode bug fixed
  • decoding quality for RTTY, PSK, and CW modes improved
  • transceivers YAESU FT-891, FT-991 support improved
  • transceivers Kenwood TS-480s support improved
  • transceivers Icom IC-7610 support added

Version 1.0.1

What's new in this version?

  • KiwiSDR LSB/USB implemented
  • mode FT-8 redesigned
  • CAT: PTT port (DST-RST) bug fixed
  • transceivers YAESU FT-2000, FT-3000, FT-5000 bugs fixed
  • the help file is accessible by the link from the program

Buy / Upgrade

Try & buy unique MixW 4 software. The trial period until you are sure that this product is worth paying for it.

To optimize your purchase, please go to the MixW Personalized Services page, where you enter your callsign for the selection of the best options when purchasing.

Users who already have registered for earlier versions of the program can purchase updates for new versions at a discount.
To check the registration for your callsign, please click the link: MixW check the registration page

If you have changed your callsign, or you need to add your other callsign, send an email to: MixW Team
with an indication of your old callsign for which registration was issued or callsigns to be added.
Adding, and replacing the callsign – for free.

To-do list

Dear friends!

We want to be open to our customers. On this page, you can see a list of found bugs in the MixW4 program.
Every day this list will be changed. After fixing a bug, it will be removed from the list. When a new bug is discovered – added. If you encounter an error in the operation of MixW4 and did not find this error in the list, please let us know about it via email – [email protected]

Category Description Priority Fixing path #
Interface Can not set arbitrary window sizes High 1.0.5
Interface Known bug: If you have problems with decoding, you need to close the RX window and re-open it. We are working on it. High 1.0.6
Core Adding FSK and WinKey ports High 1.0.6
Core An error in calculating the distance based on the QTH locator. Done 1.0.4
Core Adding Olivia, Contestia, and MFSK modes Mid ~1.0.6
Feature DX Cluster: implement ‘New only’ feature Mid 1.0.5
Interface Implement layout-changing history Mid ~1.0.6
Core MixW4 stops decoding after CW Tx High 1.0.5
Feature Expanding the program window MixW4 to additional screens (monitor, tablet, etc). Mid ~1.0.7
Core FT8: all reports show dB -50 High 1.0.5
Core FT8: The decoder is not sensitive enough. High ~1.0.6
Core Adding Ten-Tec, JRC, OmniRig, and Custom CAT protocols. Tnx to Ralph K1KOB High ~1.0.6
Core DXKeeper’s ADIF tag REGION not imported by MixW4 Done 1.0.5
Core ADIF location format XDDD MM.MMM is not supported by MixW4 Done 1.0.5
Core Crash of the MixW4 program when working with the FlexRadio SDR transceivers and other High ~1.0.6
Interface ADIF location format XDDD MM.MMM is not supported by MixW4 Done 1.0.5
Interface Make it possible to switch the coordinate display format Done 1.0.5
Core DXCluster takes a long time to refresh Mid ~1.0.5
Interface Add Copy/Paste/Clear/Cut support to the macro editing dialog Mid 1.0.5
Interface Move RX/TX controls to the main toolbar Mid 1.0.5
Core Support all macros via MixW3 Mid ~1.0.6

Known bugs – MixW4

[Mantis bugs proj_id=1]