AA-1500 ZOOM

AA-1500 ZOOM

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 1500 MHz. A built-in ZOOM capability makes graphical measurements especially effective. An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system. The analyzer is equipped with a Bluetooth Low Energy module for a wireless connection with your laptop, tablet, or smartphone.  

TURN complex analysis into FUN

320×240 color TFT display

High contrast with Low Power Consumption

Multilingual menus and help screens

Built-in Helper at the push of a button

Consistency and accuracy without prior recalibration

Bluetooth LE for communication with mobile app

RigExpertCare - 2 years of Warranty
  • Reliability is in the DNA of RigExpert Antenna and Cable analyzers.
  • RigExpertCare guarantees you two years of service or replacement of the device with a new one of your choice. Services are free.
  • Each RigExpert device goes through four phases of quality control before sending it to the user.
  • That’s why we are confident in the quality of our products.
  • But some integrated circuits may contain a hidden defect that shows up over time.
  • RigExpertCare takes this risk for you.
  • Where to service

RigExpert AA-1500 ZOOM

AA-1500 ZOOM
Frequency range
  • 0.1 to 1500 MHz
Frequency entry
  • 1 kHz
Measurement for systems
  • 25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
  • 1 to 10 in chart modes
  • 1 to 100 in numerical modes
R and X range
  • 0…1000, -1000…1000 in chart modes
  • 0…10000, -10000…10000 in numerical modes
Display modes
  • Optional open-short-load calibration
  • R, X chart, 20 to 500 points
  • Return loss chart, 20 to 500 points
  • Smith chart, 20 to 500 points
  • SWR at single or multiple frequencies
  • SWR chart, 20 to 500 points
  • SWR, return loss, R, X, Z, L, C at single frequency
  • TDR chart (Time Domain Reflectometer)
  • Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
  • Connector type: N
  • Output power: -10 dBm (at a load of 50 ohms)
  • Output signal shape: square
  • Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
  • Three 1.2V Ni-MH batteries, type AA
  • Three 1.5V alkaline batteries, type AA
  • When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
  • 320×240 color TFT display
  • 6x3 keys on the water-proof keypad
  • Bluetooth Specification v.4.2, LE
  • Menus and help screens in English (by default), Japanese, Spanish
  • USB connection to a personal computer
Operating temperature
  • 0…40 °C (32…104 °F)
  • 98 × 230 × 53 mm, (3.9 × 9.0 × 2.0 in)
  • 442 g (15.6 oz)
Accessories inside the box
  • Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
  • 4820185420303
  • Specifications are subject to change without notice
  • Мade in Ukraine
Where to buy



3021 S Valley View Blvd, Las Vegas, NV 89102.
web: https://www.gigaparts.com
ph.: 866-535-4442


PCS Elektronik d.o.o.

Delavska cesta 41
SI-4000 Kranj
e-mail: radio@pcs-electronics.com
web: http://www.pcs-electronics.com
ph./Fax: +386 4 2316129
fax: +386 4 2316-128

USA and Canada

Yuri Onipko, N2WCQ/VE3DZ RigExpert USA and Canada, Inc.

e-mail: usa@rigexpert.net
web: https://rigexpert.net
ph: 716-240-2597
Buffalo, N.Y.