Discontinued products
Antenna analyzers

RigExpert
AA-1400

Specifications
RigExpert AA-1400 are powerful antenna analyzer, designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays, are key features of this analyzer which significantly reduce the time required to adjust an antenna.

Frequency range

0.1 to 1400 MHz

Frequency entry

1 kHz resolution

SWR measurement range

1 to 10 in graph mode, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in graph mode, 0…10000, -10000…10000 in numerical modes

Display modes

R, X graph, 80 points, Smith (or polar) chart, 80 points, SWR at single or multiple frequencies, SWR graph, 80 points, SWR, return loss, R, X, Z, L, C at single frequency, TDR (Time Domain Reflectometer) graph

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

230x100x55 mm (9x4x2”)

Operating temperature

0…40 °C (32…104 °F)

Weight

650g (23 Oz)

GTIN-13

4820185420051

Accessories inside the box

Battery charger, N-to-UHF adapter, NiMH rechargeable batteries (3 pcs), RigExpert AA-1400, Soft case with straps, USB cable, User’s manual

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert
AA-1000

Specifications
RigExpert AA-600, AA-1000 and AA-1400 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.

Frequency range

0.1 to 1000 MHz

Frequency entry

1 kHz resolution

SWR measurement range

1 to 10 in graph mode, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in graph mode, 0…10000, -10000…10000 in numerical modes

Display modes

R, X graph, 80 points, Smith (or polar) chart, 80 points, SWR at single or multiple frequencies, SWR graph, 80 points, SWR, return loss, R, X, Z, L, C at single frequency, TDR (Time Domain Reflectometer) graph

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

230x100x55 mm (9x4x2”)

Operating temperature

0…40 °C (32…104 °F)

Weight

650g (23 Oz)

GTIN-13

4820185420044

Accessories inside the box

Battery charger, N-to-UHF adapter, NiMH rechargeable batteries (3 pcs), RigExpert AA-1000, Soft case with straps, USB cable, User’s manual

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert
AA-600

Specifications
RigExpert AA-600, AA-1000 and AA-1400 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.

Frequency range

0.1 to 600 MHz

Frequency entry

1 kHz resolution

SWR measurement range

1 to 10 in graph mode, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in graph mode, 0…10000, -10000…10000 in numerical modes

Display modes

R, X graph, 80 points, Smith (or polar) chart, 80 points, SWR at single or multiple frequencies, SWR graph, 80 points, SWR, return loss, R, X, Z, L, C at single frequency, TDR (Time Domain Reflectometer) graph

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

230x100x55 mm (9x4x2”)

Operating temperature

0…40 °C (32…104 °F)

Weight

650g (23 Oz)

Accessories inside the box

Battery charger, N-to-UHF adapter, NiMH rechargeable batteries (3 pcs), RigExpert AA-600, Soft case with straps, USB cable, User’s manual

GTIN-13

4820185420037

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-55 ZOOM Option Bluetooth

Specifications
We implanted Bluetooth technology into the antenna analyzer and opened up new applications for this popular device.
Now, thanks to its ability to work in conjunction with a smartphone or the tablet/netbook, the new RigExpert AA-55 ZOOM Option Bluetooth antenna analyzer is your laboratory in a field.

Frequency range

0.06 to 55 MHz

Frequency entry

1 kHz resolution

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

Cable tools (loss and characteristic impedance), R, X graph, 100 points, Return loss chart, 100 points, Smith chart, 100 points, SWR at single or multiple frequencies, SWR graph, 100 points, SWR, return loss, R, X, Z, L, C at single frequency

RF output

Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square, 0.06 to 55 MHz

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Two 1.2V Ni-MH batteries, type AA, Two 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

Operating temperature

0…40 °C (32…104 °F)

Weight

310 g (10.9 Oz) w/o batteries

Accessories inside the box

Alkaline batteries, CD with drivers and software, RigExpert AA-55 ZOOM Option Bluetooth, Soft case, USB cable, User’s manual

GTIN-13

4820185420204

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert
AA-170

Specifications
RigExpert AA-170 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Mainly, this is an SWR (Standing Wave Ratio) and impedance measurement instrument (vector impedance analyzer).

Frequency range

0.1 to 170 MHz

Frequency entry

1 kHz resolution

SWR measurement range

1 to 10

R and X range

0…10000, -10000…10000 in numerical modes, 0…200, -200…200 in graph mode

Display modes

R, X graph, 100 points, SWR at single or multiple frequencies, SWR graph, 100 points, SWR, return loss, R, X, Z, L, C at single frequency

RF output

Connector type: UHF (SO-239), Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square, 0.1…30 MHz. For higher frequencies, third or fifth harmonics are used.

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Three 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

128×64 graphical backlit LCD, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

22·10·3.6 cm (9·4·1.5”)

Operating temperature

0…40 °C (32…104 °F)

Weight

400g (14 Oz)

Accessories inside the box

Alkaline batteries, CD with drivers and software, RigExpert AA-170, Soft case (optional, not included in standard package), Software manual, USB cable (optional, not included in standard package), User’s manual

GTIN-13

4820185420075

Note

* Ni-MH batteries are not included with the analyzer. Users can purchase these batteries with a corresponding charging adapter., Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert
AA-54

Specifications
RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).

Frequency range

AA-54: 0.1 to 54 MHz

Frequency entry

1 kHz

SWR measurement range

1 to 10 in chart modes

R and X range

0…10000, -10000…10000 in numerical modes, 0…200, -200…200 in graph mode

Display modes

R, X graph, 100 points, SWR at single or multiple frequencies, SWR graph, 100 points, SWR, return loss, R, X, Z, L, C at single frequency

RF output

Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square, 0.1…10 MHz (AA-30) or 0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-54) harmonics are used

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *, Two 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

128×64 graphical backlit LCD, 6x3 keys on the water-proof keypad, Multilingual menus and help screens, USB connection to a personal computer

Dimensions

22·10·3.6 cm (9·4·1.5”)

Operating temperature

0…40 °C (32…104 °F)

Weight

400g (14 Oz)

Accessories inside the box

Alkaline batteries, CD with drivers and software, RigExpert AA-54, Soft case (optional, not included in standard package), Software manual, USB cable (optional, not included in standard package), User’s manual

GTIN-13

4820185420013

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert AA-30

Specifications
RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers

Frequency range

AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz

Frequency entry

1 kHz

SWR measurement range

1 to 10 in chart modes

R and X range

0…10000, -10000…10000 in numerical modes, 0…200, -200…200 in graph mode

Display modes

R, X graph, 100 points, SWR at single or multiple frequencies, SWR graph, 100 points, SWR, return loss, R, X, Z, L, C at single frequency

RF output

Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square, 0.1…10 MHz (AA-30) or 0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-54) harmonics are used

Power

Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used, Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *, Two 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

128×64 graphical backlit LCD, 6x3 keys on the water-proof keypad, AA-54: multilingual menus and help screens, AA-30:menus and help screens in English language, USB connection to a personal computer

Dimensions

22·10·3.6 cm (9·4·1.5”)

Operating temperature

0…40 °C (32…104 °F)

Weight

400g (14 Oz)

Accessories inside the box

Alkaline batteries, CD with drivers and software, RigExpert AA-30, Soft case (optional, not included in standard package), Software manual, USB cable (optional, not included in standard package), User’s manual

GTIN-13

4820185420020

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-230 ZOOM
Option BLE

Specifications
We implanted Bluetooth technology into the antenna analyzer and opened up new applications for this popular device.
Now, thanks to its ability to work in conjunction with a smartphone or the tablet/netbook,
the new RigExpert AA-230 ZOOM Option BLE antenna analyzer is your laboratory in a field.

Frequency range

0.1 to 230 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

Cable tools (loss and characteristic impedance), R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, SWR, return loss, R, X, Z, L, C at single frequency, TDR (distance to fault)

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Four 1.2V Ni-MH batteries, type AAA, Four 1.5V alkaline batteries, type AAA, Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

290×220 color TFT display, 6x3 keys on the water-proof keypad, USB connection to a personal computer

Dimensions

82 x 182 x 32 mm (3.2 x 7.2 x 1.3 in)

Operating temperature

0…40 °C (32…104 °F)

Weight

236 g (8.32 oz)

Accessories inside the box

Alkaline batteries, N Male SO-239 Female adaptor, RigExpert AA-230 ZOOM Option BLE, Soft case, USB cable, User’s manual

GTIN-13

4820185420211

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-1500 ZOOM

0.1 to 1500 MHz
1000.00 USD
Specifications
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing the characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Bluetooth LE for communication with mobile app

Frequency range

0.1 to 1500 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, Spanish, USB connection to a personal computer

Operating temperature

0…40 °C (32…104 °F)

Dimensions

98 × 230 × 53 mm, (3.9 × 9.0 × 2.0 in)

Weight

442 g (15.6 oz)

Accessories inside the box

Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter

GTIN-13

4820185420303

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More
Kits

RigExpert
AA-30.ZERO

Specifications
The most affordable vector HF antenna analyzer in the world! USB connection & free software. Arduino users: add a vector impedance analyzer and an RF generator to your project!
Creating the AA-30.ZERO, we met the numerous wishes of radio amateurs and DIY-hobbyists to give them a measuring tool that can be easily integrated into their own projects. The analyzer is available as a kit to meet this requirement.

Frequency range

0.06 to 30 MHz

Frequency entry

1 Hz

Measurement for systems

25, 50, 75, 100 Ohm

Housing

none, PCB only – available as a kit

Display

4 LEDs

Communication interface

UART, 38400 baud

SWR measurement range

1 to 100

R and X range

0… 10000, -10000… 10000

RF output

Connector type: SMA, Output power: +13 dBm (at 50 Ohm load), Output signal shape: square, 0.06 to 30 MHz

Power

Current consumption (max) 150 mA, Supply: external 5V

General data

Dimensions (W x H x D), PCB only w/o connectors: 55 mm x 69 mm x 5 mm (2.1 in x 2.7 in x 0.2 in), Operating temperature: 0…40 °C (32…104 °F), Weight w/o connectors: 65 g (2.29 Oz)

Note

Specifications are subject to change without notice, Мade in Ukraine

GTIN-13

4820185420112

Close specifications

More
Interfaces

RigExpert WTI-1

135.00 USD
Specifications
Connect your transceiver to the Internet via a Wi-Fi network. Use your laptop to operate phone, CW or digital modes from anywhere in the world!

General features

CAT (Computer Aided Transceiver) system, FSK output, PTT and CW outputs, RS-485 port to connect external devices, such as antenna relays, Transceiver audio interface for operating digital modes, voice recording and playback

Transceiver connection

Single 25-pin connector for transceiver cable, Various transceiver models supported

Audio interface

Input/output samplerate: 8 to 48 kHz, Insulated from digital nets, Maximum input/output amplitude is 1V, True 16-bit DAC/ADC used

CAT serial port

Baudrate: 300-115200 baud, Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)

PTT/CW outputs

CW output: open collector, Maximum current is 50 mA, PTT output: open collector and TTL-level

FSK output

Baudrate: 45-1200 baud, Open collector output

Weight

300 g

Note

Мade in Ukraine

Close specifications

More

RigExpert TI-8

135.00 USD
Specifications
RigExpert TI-8 is a device for operating phone, CW and digital modes using personal computer. All in one through a single USB port!
To connect the TI-8 to your transceiver, you will need a special cable. Fortunately, pre-built cables for many transceivers are available. Moreover, you may construct a cable yourself, using the diagramspublished on our website.

General features

CAT (Computer Aided Transceiver) system, CW keyer (WinKey), FSK output, PTT and CW outputs, Squelch input, Transceiver audio interface for operating digital modes, voice recording and playback

Computer connection

No external power supply needed, Powered from the USB port (consuming 100 mA maximum), USB (Universal Serial Bus) connector

Transceiver connection

Single 25-pin connector for transceiver cable, Various transceiver models supported

Audio interface

Input/output samplerate: 8 to 48 kHz, Insulated from digital nets, Maximum input/output amplitude is 1V, True 16-bit DAC/ADC used, Volume levels are adjusted by the front panel potentiometers

CAT serial port

Baudrate: 300-115200 baud, Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)

PTT/CW outputs

CW output: open collector, Maximum current is 50 mA, PTT output: open collector and TTL-level

System requirements

Desktop or laptop computer with USB 1/2/3 compliant port, No USB drivers required, Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system

Weight

300 g

Operating temperature

0…40 °C (32…104 °F)

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

RigExpert TI-7

135.00 USD
Specifications
RigExpert TI-7 is a device for operating phone, CW and digital modes using personal computer. All in one through a single USB port!
To connect the TI-7 to your transceiver, you will need a special cable. Fortunately, pre-built cables for many transceivers are available. Moreover, you may construct a cable yourself, using the diagramspublished on our website.

General features

CAT (Computer Aided Transceiver) system, FSK output, PTT and CW outputs, Squelch input, Transceiver audio interface for operating digital modes, voice recording and playback

Computer connection

No external power supply needed, Powered from the USB port (consuming 100 mA maximum), USB (Universal Serial Bus) connector

Transceiver connection

Single 25-pin connector for transceiver cable, Various transceiver models supported

Audio interface

Input/output samplerate: 8 to 48 kHz, Insulated from digital nets, Maximum input/output amplitude is 1V, True 16-bit DAC/ADC used, Volume levels are adjusted by the front panel potentiometers

CAT serial port

Baudrate: 300-115200 baud, Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)

PTT/CW outputs

CW output: open collector, Maximum current is 50 mA, PTT output: open collector and TTL-level

System requirements

Desktop or laptop computer with USB 1/2/3 compliant port, No USB drivers required, Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system

Dimensions

11 x 13 x 4 cm

Weight

300 g

Operating temperature

0…40 °C (32…104 °F)

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More