A powerful 1 GHz VNA
Kits
Perfect device for embedded installation and uses, for example, in antenna tuners, transceivers, or power amplifiers as the core of the load-matching circuit.
- For manufacturers of power equipment HAM radio direction.
- For developers and manufacturers of devices requiring long-distance packet data transmission using different protocols.
- Measures up to 1GHz– Instantly returns R, X, SWR & Return Loss values.
- Comes factory calibrated.
- Use USB, UART, I2C, and SPI interfaces .
Two independent USB 3.0 interfaces
True full duplex SDR transceiver
Fully continuous Tx/Rx data stream
USB 3.0 interface
SDRSharp compatible
Continuous frequency range
100 kHz – 3.8 GHz
IQ sample rate (bandwidth)
up to 61.44 MHz
Sample depth
12 bits
Power Output (CW)
up to 10 dBm
Frequency stability
±0.5 ppm
PCB dimensions
100 mm x 64 mm
Outline dimensions
114.9 mm x 64 mm x 16.9 mm
It is a powerful 1 GHz VNA for embedded applications & perfect device for embedded installation. It used, for example, antenna tuners, transceivers, or power amplifiers as the core of the load-matching circuit.
ZERO II is also useful for:
manufacturers of power equipment HAM radio direction;
developers and manufacturers of devices requiring long-distance packet data transmission using different protocols.
It is capable on:
measures up to 1GHz– Instantly returns R, X, SWR & Return Loss values;
comes factory calibrated;
has USB, UART, I2C, and SPI interfaces use.
Frequency range
0.1 to 1000 MHz
Frequency setting time
20 ms
Return values
Resistance, Reactance (signed), SWR, Return Loss
Output connector
SMA
Output power
-10 dBm
Power
USB or from 3V to 48V through Power port
Operating temperature
0…40 °C (32…104 °F)
Interface
USB, I2C, SPI, UART
Dimensions
30 x 40 x 4 mm (1 x 2 x 0.2 inches)
Weight
30 grams (3 Oz)
Warranty
1 year
Note
Specifications are subject to change without notice, Мade in Ukraine
The world's most affordable KX vector antenna analyzer! USB connection and free software. Arduino users add a vector impedance analyzer and RF generator to your project!
Frequency range
0.06 to 30 MHz
Frequency entry
1 Hz
Measurement for systems
25, 50, 75, 100 Ohm
Housing
none, PCB only – available as a kit
Display
4 LEDs
Communication interface
UART, 38400 baud
SWR measurement range
1 to 100
R and X range
0… 10000, -10000… 10000
RF output
Connector type: SMA, Output power: +13 dBm (at 50 Ohm load), Output signal shape: square, 0.06 to 30 MHz
Power
Current consumption (max) 150 mA, Supply: external 5V
General data
Dimensions (W x H x D), PCB only w/o connectors: 55 mm x 69 mm x 5 mm (2.1 in x 2.7 in x 0.2 in), Operating temperature: 0…40 °C (32…104 °F), Weight w/o connectors: 65 g (2.29 Oz)
Note
Specifications are subject to change without notice, Мade in Ukraine
