Complex measurements Make it easy
Antenna and Cable analyzers (VNA)
HF Analyzers
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 1500 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 2000 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Frequency range
0.06 to 35 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes
Display modes
R, X chart, 100 points, SWR chart, 100 points
RF output
Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Two 1.2V Ni-MH batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
320×240 color TFT display, 6x3 keys on the water-proof keypad, USB connection to a personal computer
Accessories inside the box
Alkaline batteries, Soft case, USB cable, User’s manual
Dimensions
103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)
Operating temperature
0…40 °C (32…104 °F)
Weight
310 g (10.9 Oz) w/o batteries
GTIN-13
4820185420105
Note
Мade in Ukraine
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Frequency range
0.06 to 55 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes
Display modes
R, X chart, 100 points, Return loss chart, 100 points, Smith chart, 100 points, SWR at single or multiple frequencies, SWR chart, 100 points, SWR, return loss, R, X, Z, L, C at single frequency
RF output
Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Two 1.2V Ni-MH batteries, type AA, Two 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
320×240 color TFT display, 6x3 keys on the water-proof keypad, Menus and help screens in English (by default), Japanese, French, USB connection to a personal computer
Dimensions
103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)
Operating temperature
0…40 °C (32…104 °F)
Weight
310 g (10.9 Oz) w/o batteries
GTIN-13
4820185420099
Note
Specifications are subject to change without notice, Мade in Ukraine
Accessories inside the box
Alkaline batteries, RigExpert AA-55 ZOOM, Soft case, USB cable, User’s manual
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing the characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 650 MHz
Frequency entry
1 kHz
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
320×240 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, Ukrainian, Polish, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
450 g (15.9 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420297
Note
Specifications are subject to change without notice, Мade in Ukraine
NCAGE Code
A37ZJ
Застосування
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
16 hours of work from one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 230 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, Menus and help screens in English (by default), Japanese, Monochrome electronic paper display, 200 × 200, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Weight
185 grams (6.5 Oz) with battery
Accessories inside the box
Lanyard, Quick start guide, USB cable
GTIN-13
4820185420259
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
High contrast E Ink display
16-hour runtime, one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 500 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: UHF (SO-239), Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, High contrast E Ink display, 200 × 200, Menus and help screens in English (by default), Japanese, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Weight
185 grams (6.5 Oz) with battery
Accessories inside the box
Lanyard, Quick start guide, USB cable
GTIN-13
4820185420358
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables, feedlines, filters, and other
color TFT, 220 * 220 pixels
intuitive interface and built-in helper
Bluetooth
16-hour runtime, one charge
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 600 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 290×220 color TFT display, Menus and help screens in English (by default), Japanese, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
GTIN-13
4820185420280
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables feedlines, filters, and other
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Factory calibration
Сolor TFT display
User-friendly interface
USB Type-C for PC
Bluetooth
16-hour runtime, one charge
Pocket-size
Splash and dustproof case
Operation temperature from -20° to 55°C
Frequency entry
1 kHz
Frequency range
0.1 to 1000 MHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Note
Specifications are subject to change without notice, Мade in Ukraine
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, R, X chart, Return loss chart, Single (measure SWR, |Z|, R, X, C, L, RL, Mag&Phase), SWR chart, TDR (distance to fault), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 220x220 TFT, Menus and help screens in English (by default), Japanese, USB connection to a personal computer
Operating temperature
-20°- 55°C (-4°-131°F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
GTIN-13
4820185420365
Застосування
1 GHz VNA for embedded applications & perfect device for embedded installation. It used, for example, antenna tuners, transceivers, or power amplifiers as the core of the load-matching circuit. For use without additional settings, take advantage of our free Antscope software for PC or Android. To start measuring, all you need is a PC (tablet or smartphone) with Antscope installed and a USB cable to connect the VNA Zero II.
ZERO II is also useful for:
manufacturers of power equipment HAM radio direction;
developers and manufacturers of devices requiring long-distance packet data transmission using different protocols.
It is capable on:
measures up to 1GHz– Instantly returns R, X, SWR & Return Loss values;
comes factory calibrated;
has USB, UART, I2C, and SPI interfaces use.
Frequency range
0.1 to 1000 MHz
Frequency setting time
20 ms
Return values
Resistance, Reactance (signed), SWR, Return Loss
Output connector
SMA
Output power
-10 dBm
Power
USB or from 3V to 48V through Power port
Operating temperature
0…40 °C (32…104 °F)
Interface
USB, I2C, SPI, UART
Dimensions
30 x 40 x 4 mm (1 x 2 x 0.2 inches)
Weight
30 grams (3 Oz)
Warranty
1 year
Note
Specifications are subject to change without notice, Мade in Ukraine
GTIN-13
4820185420341
VHF Analyzers
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 1500 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 2000 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
A built-in ZOOM capability makes graphical measurements especially effective
Frequency range
0.1 to 230 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes
Display modes
Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Four 1.2V Ni-MH batteries, type AAA, Four 1.5V alkaline batteries, type AAA, Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
290×220 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, USB connection to a personal computer
Dimensions
82 x 182 x 32 mm (3.2 x 7.2 x 1.3 in)
Operating temperature
0…40 °C (32…104 °F)
Weight
236 g (8.32 oz)
Accessories inside the box
Alkaline batteries, N Male SO-239 Female adaptor, Soft case, USB cable, User’s manual
GTIN-13
4820185420082
Note
Specifications are subject to change without notice, Мade in Ukraine
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing the characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 650 MHz
Frequency entry
1 kHz
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
320×240 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, Ukrainian, Polish, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
450 g (15.9 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420297
Note
Specifications are subject to change without notice, Мade in Ukraine
NCAGE Code
A37ZJ
Застосування
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
16 hours of work from one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 230 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, Menus and help screens in English (by default), Japanese, Monochrome electronic paper display, 200 × 200, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Weight
185 grams (6.5 Oz) with battery
Accessories inside the box
Lanyard, Quick start guide, USB cable
GTIN-13
4820185420259
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
High contrast E Ink display
16-hour runtime, one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 500 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: UHF (SO-239), Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, High contrast E Ink display, 200 × 200, Menus and help screens in English (by default), Japanese, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Weight
185 grams (6.5 Oz) with battery
Accessories inside the box
Lanyard, Quick start guide, USB cable
GTIN-13
4820185420358
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables, feedlines, filters, and other
color TFT, 220 * 220 pixels
intuitive interface and built-in helper
Bluetooth
16-hour runtime, one charge
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 600 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 290×220 color TFT display, Menus and help screens in English (by default), Japanese, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
GTIN-13
4820185420280
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables feedlines, filters, and other
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Factory calibration
Сolor TFT display
User-friendly interface
USB Type-C for PC
Bluetooth
16-hour runtime, one charge
Pocket-size
Splash and dustproof case
Operation temperature from -20° to 55°C
Frequency entry
1 kHz
Frequency range
0.1 to 1000 MHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Note
Specifications are subject to change without notice, Мade in Ukraine
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, R, X chart, Return loss chart, Single (measure SWR, |Z|, R, X, C, L, RL, Mag&Phase), SWR chart, TDR (distance to fault), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 220x220 TFT, Menus and help screens in English (by default), Japanese, USB connection to a personal computer
Operating temperature
-20°- 55°C (-4°-131°F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
GTIN-13
4820185420365
Застосування
1 GHz VNA for embedded applications & perfect device for embedded installation. It used, for example, antenna tuners, transceivers, or power amplifiers as the core of the load-matching circuit. For use without additional settings, take advantage of our free Antscope software for PC or Android. To start measuring, all you need is a PC (tablet or smartphone) with Antscope installed and a USB cable to connect the VNA Zero II.
ZERO II is also useful for:
manufacturers of power equipment HAM radio direction;
developers and manufacturers of devices requiring long-distance packet data transmission using different protocols.
It is capable on:
measures up to 1GHz– Instantly returns R, X, SWR & Return Loss values;
comes factory calibrated;
has USB, UART, I2C, and SPI interfaces use.
Frequency range
0.1 to 1000 MHz
Frequency setting time
20 ms
Return values
Resistance, Reactance (signed), SWR, Return Loss
Output connector
SMA
Output power
-10 dBm
Power
USB or from 3V to 48V through Power port
Operating temperature
0…40 °C (32…104 °F)
Interface
USB, I2C, SPI, UART
Dimensions
30 x 40 x 4 mm (1 x 2 x 0.2 inches)
Weight
30 grams (3 Oz)
Warranty
1 year
Note
Specifications are subject to change without notice, Мade in Ukraine
GTIN-13
4820185420341
UHF Analyzers
Perfect for amateur, professional, and commercial radio
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Determining the parameters of other devices
Factory calibration
Big sunlight-readable Blanview® display
A built-in ZOOM for any detail of charts
Multilingual intuitive interface
Help at the push of a button with the built-in Helper
Storage of OSL calibration data for future use
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 3000 MHz
Frequency entry
1 kHz
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Return loss chart, Smith chart, SWR at single or multiple frequencies, SWR chart, SWR, return loss, R, X, Z, L, C at single frequency, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 5 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Note
Specifications are subject to change without notice, Мade in Ukraine
GTIN-13
4820185420372
Застосування
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 1500 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 2000 MHz
Frequency entry
1 kHz
Measurement for systems
25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
442 g (15.6 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420310
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing the characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Bluetooth LE for communication with mobile app
Frequency range
0.1 to 650 MHz
Frequency entry
1 kHz
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0…2000, -2000…2000
Display modes
Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
320×240 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, Ukrainian, Polish, Spanish and German, USB connection to a personal computer
Operating temperature
0…40 °C (32…104 °F)
Weight
450 g (15.9 oz)
Dimensions
100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
GTIN-13
4820185420297
Note
Specifications are subject to change without notice, Мade in Ukraine
NCAGE Code
A37ZJ
Застосування
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
High contrast E Ink display
16-hour runtime, one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 500 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: UHF (SO-239), Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, High contrast E Ink display, 200 × 200, Menus and help screens in English (by default), Japanese, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Weight
185 grams (6.5 Oz) with battery
Accessories inside the box
Lanyard, Quick start guide, USB cable
GTIN-13
4820185420358
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables, feedlines, filters, and other
color TFT, 220 * 220 pixels
intuitive interface and built-in helper
Bluetooth
16-hour runtime, one charge
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field
Frequency range
0.1 to 600 MHz
Frequency entry
1 kHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Display modes
Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 290×220 color TFT display, Menus and help screens in English (by default), Japanese, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B
Operating temperature
-15° … 40 ° C (5 … 104 ° F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
GTIN-13
4820185420280
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
Note
Specifications are subject to change without notice, Мade in Ukraine
Застосування
Checking and adjusting antennas
Measurement of various parameters of cables feedlines, filters, and other
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Factory calibration
Сolor TFT display
User-friendly interface
USB Type-C for PC
Bluetooth
16-hour runtime, one charge
Pocket-size
Splash and dustproof case
Operation temperature from -20° to 55°C
Frequency entry
1 kHz
Frequency range
0.1 to 1000 MHz
Measurement for systems
12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm
SWR measurement range
1 to 10 in chart modes, 1 to 100 in numerical modes
R and X range
0… 10000, -10000… 10000
Note
Specifications are subject to change without notice, Мade in Ukraine
Display modes
HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, R, X chart, Return loss chart, Single (measure SWR, |Z|, R, X, C, L, RL, Mag&Phase), SWR chart, TDR (distance to fault), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square
Power
One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger
Interface
2 × 3 keys on the waterproof keyboard, 220x220 TFT, Menus and help screens in English (by default), Japanese, USB connection to a personal computer
Operating temperature
-20°- 55°C (-4°-131°F)
Weight
185 grams (6.5 Oz) with battery
Dimensions
185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)
Accessories inside the box
Quick-start guide, Neck strap, USB cable, N-type to UHF adapter
GTIN-13
4820185420365
Застосування
1 GHz VNA for embedded applications & perfect device for embedded installation. It used, for example, antenna tuners, transceivers, or power amplifiers as the core of the load-matching circuit. For use without additional settings, take advantage of our free Antscope software for PC or Android. To start measuring, all you need is a PC (tablet or smartphone) with Antscope installed and a USB cable to connect the VNA Zero II.
ZERO II is also useful for:
manufacturers of power equipment HAM radio direction;
developers and manufacturers of devices requiring long-distance packet data transmission using different protocols.
It is capable on:
measures up to 1GHz– Instantly returns R, X, SWR & Return Loss values;
comes factory calibrated;
has USB, UART, I2C, and SPI interfaces use.
Frequency range
0.1 to 1000 MHz
Frequency setting time
20 ms
Return values
Resistance, Reactance (signed), SWR, Return Loss
Output connector
SMA
Output power
-10 dBm
Power
USB or from 3V to 48V through Power port
Operating temperature
0…40 °C (32…104 °F)
Interface
USB, I2C, SPI, UART
Dimensions
30 x 40 x 4 mm (1 x 2 x 0.2 inches)
Weight
30 grams (3 Oz)
Warranty
1 year
Note
Specifications are subject to change without notice, Мade in Ukraine
GTIN-13
4820185420341
