Transceiver Cables for RigExpert Interfaces (all rigs)

Attention: If someone sells you a product with a 25-pin transceiver connector which is “compatible” to RigExpert products, then be aware: this is a theft and a forgery. We have never given permission to copy our work to any of companies. The pin-out of the 25-pin transceiver connector is copyright by RigExpert.

Check the availability of the pre-assembled cables on your local distributor’s website.

Please notice the following:

An on-cable CW paddle socket is not needed, since it is already built into RigExpert Plus/TI-5 and not used for RigExpert Standard/TI-7/TI-8/WTI-1.
For dual-channel transceivers (Yaesu FT-1000MP, Icom IC-7800, Ten-Tec Orion), please see the corresponding dual-channel diagrams.
EchoLink users: the diagrams do not show the connection of transceiver squelch output and pin 5 of the 25-pin plug. Please add this connection to use the hardware squelch feature.

For other models which are not in the list please see the following articles: Designing Transceiver Cables and 25-pin transceiver connector.

Yaesu transceiver cables part 1

FT-1000MP, FT-1000MP MARK-V, FT-2000

For FT-2000, please turn Off menu #029 (#030 with newer firmware), “CAT RTS”.

FT-1000MP, FT-1000MP MARK-V, FT-2000 - dual channel version

For FT-2000, please turn Off menu #029 (#030 with newer firmware), “CAT RTS”.

FT-1000MP, FT-1000MP MARK-V, FT-2000 - dual channel version using PACKET connector

For FT-2000, please turn Off menu #029 (#030 with newer firmware), “CAT RTS”.

FT-100, FT-817, FT-857, FT-897

FT-990, FT-1000, FT-1000D

FT-840

FT-757, FT-757GX

FT-757GXII

FT-920

FT-847 (HF)

FT-847 (VHF)

FT-847 (HF+VHF)

FT-767, FT-980

FT-747

FT-3000M, FT-7100, FT-7800, FT-8100R, FT-8800R, FT-8900R

For FT-2000, please turn Off menu #029 (#030 with newer firmware), “CAT RTS”.

Yaesu transceiver cables part 2

FT-736 (FM mode)

FT-736 (SSB/CW modes)

FT-890, FT-900

FT-600

FT-2500

FT-102

VX-5, VX-6, VX-150

FT-51R, VX-2, VX-3, VX-6

FTdx9000D - dual channel version with AF OUT / PATH connectors

FTdx9000D - dual channel version with PACKET connectors

FT-212R

FT-450

FT-950, FTDX3000

FTM-350AR/AE

VX-1700, data only

VX-1210, data only

Icom transceiver cables

IC-706MK2, IC-718, IC-703, IC-7000, IC-7410, IC-7300

IC-706MK2 (using RJ-45 microphone connector)

IC-706MK2, IC-703, IC-7000 (using DATA socket)

IC-746, IC-746PRO, IC-7400

IC-275, IC-721, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-738, IC-761, IC-765, IC-775, IC-781, IC-970, IC-7600, IC-7700, IC-7800, IC-756 (all models), IC-718 (if using an ACC conversion cable)