Stick 230

Partners

Applications

• Amateur radio
• Commercial radio
• Telecom
• Field Communication

Use cases

• Checking and adjusting antennas
• Measurement of various parameters of cables,
feedlines, filters and other

Downloads

Stick 230 Antenna and Cable Analyzer Datasheet Stick 230 Antenna and Cable Analyzer Manual ENG Stick 230 Antenna and Cable Analyzer Manual SP Stick 230 Antenna and Cable Analyzer Manual JAP AntScope2 Software for Linux AntScope2 Software for macOS AntScope2 Software for Windows Flashtool Firmware for macOS Flashtool Firmware for Windows

Stick 230
Specifications

Frequency range

0.1 to 230 MHz

Frequency entry

1 kHz

Measurement for systems

12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

SWR measurement range

1 to 10 in chart modes
1 to 100 in numerical modes

R and X range

0… 10000, -10000… 10000

Display modes

Multé (a quick check of multiband antennas)
SWR chart, 100 points
SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency

RF output

Connector type: UHF (SO-239)
Output power: -10 dBm (at a load of 50 ohms)
Output signal shape: square

Power

One lithium-ion battery 3.7 V type 18650
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Сharge time: 3 hours when using a charger

Interface

2 × 3 keys on the waterproof keyboard
Menus and help screens in English (by default), Japanese
Monochrome electronic paper display, 200 × 200
USB connection to a personal computer
v.4.2 BLE Single Mode, Class B

Dimensions

185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

Operating temperature

-15° … 40 ° C (5 … 104 ° F)

Weight

185 grams (6.5 Oz) with battery

Accessories inside the box

Lanyard
Quick start guide
USB cable

GTIN-13

4820185420259

Note

Specifications are subject to change without notice
Мade in Ukraine

Downloads

Downloads

Stick 230

Stick 230 Specifications

Downloads

Stick 230
Specifications